renner@gemini:/usr/src/comedi/comedi-0.7.57 $ make config
sh scripts/Configure
using LINUXDIR=/usr/src/linux
Kernel source version is 2.2.17
#
# Using defaults found in .config
#
*
* Comedi Features
*
Verbose Debugging (CONFIG_COMEDI_DEBUG) [Y/n/?] y
Kernel Comedilib (CONFIG_COMEDI_KLIB) [M/n/?] m
*
* Hardware device drivers
*
Data Translation boards (CONFIG_COMEDI_DT) [N/y/?] y
  DT 2801 (CONFIG_COMEDI_DT2801) [N/m/?] (NEW) m
  DT 2811 (CONFIG_COMEDI_DT2811) [N/m/?] (NEW) n

  DT3000 (CONFIG_COMEDI_DT3000) [N/m/?] (NEW) n
National Instruments boards (CONFIG_COMEDI_NI) [N/y/?] y
  AT-MIO E series (CONFIG_COMEDI_NI_ATMIO) [N/m/?] (NEW) m
  PCI-MIO E series (CONFIG_COMEDI_NI_PCIMIO) [N/m/?] (NEW) m
  NI PCI-DIO series (CONFIG_COMEDI_NI_PCIDIO) [N/m/?] (NEW) m

Generic 8255 support (CONFIG_COMEDI_8255) [M/n/?] m
Quanser Consulting MultiQ-3 (CONFIG_COMEDI_MULTIQ3) [N/m/?] n
Generic parallel port support (CONFIG_COMEDI_PARPORT) [M/n/?] m

Makefiles for comedi should now be configured.
Run 'make dep ; make' to compile, and then 'make install' to install.

renner@gemini:/usr/src/comedi/comedi-0.7.57 $ make

renner@gemini:/usr/src/comedi/comedi-0.7.57 $ su -c "make install"

renner@gemini:/usr/src/comedi/comedi-0.7.57 $ su -c "make dev"
Password:
mknod -m 666 /dev/comedi0 c 98 0
mknod -m 666 /dev/comedi1 c 98 1
mknod -m 666 /dev/comedi2 c 98 2
mknod -m 666 /dev/comedi3 c 98 3

renner@gemini:/usr/src/comedi/comedilib-0.7.14 $ make

renner@gemini:/usr/src/comedi/comedilib-0.7.14 $ su -c "make install"

I know I've mentioned a few trademarks, they're owned by their owners.
This page copyright © 2001 by Michael Renner. Consider it licensed under the GPL.

slide_03.html