Serial number location

The serial number is located on the back of the scanning unit.

Scanner specifications

• Scan Speeds:
  Exposure rates: normal, 6 ms/line; fast b/w, 2 ms/line
  Typical documents (Measurements taken using a 90 MHz Pentium (R) PC; excludes lamp warm-up and calibration time--typically 1-4 seconds.):
• sharp b/w photo, 150 dpi, letter/A4, 11 seconds
• text page, 300 dpi, letter/A4, 21 seconds
• sharp b/w drawing, 300 dpi, letter/A4, 7 seconds
• sharp millions of colors, 4-inch by 5-inch, 150 dpi, 4 seconds
• Maximum Document Size: 8-1/2 X 11.7-inch (216 X 297 mm)
• Interface: SCSI-2 connectors; dedicated SCSI adapter included for PC (ISA and EISA) systems (driver provided for ASPI and CAM-compliant SCSI cards); SCSI for Macintosh. Scanner provides automatic, internal termination of SCSI bus, as needed.

System Requirements

For IRIX [tm] or Linux

• One available expansion card slot for the HP Interface Card, or:
• For IRIX, the SCSI port that came with the computer
• For Linux, an ASPI- or CAM-compliant SCSI card
• ISA or EISA bus
• For PC, 80486 processor or greater
• For IRIX, R4000 processor or greater
• 8 MB RAM or more
• 20 MB available hard disk space
• VGA monitor 640 X 480 resolution or greater
• pointing device (such as a mouse)
• Video Graphics Array (VGA) monitor

Physical Specifications

Dimensions:

Length:	19.1 inches (485.1 mm)
Width:	12.0 inches (306 mm)
Depth:	4.9 inches (124.8 mm)
Net Weight:	12.5 lb. (5.7 kg)
Maximum Shipping Weight:	19.5 lb. (varies per option per region)

Electrical Specifications

Power Requirements:	100-240 VAC, 47-63 Hz
Power Consumption:	36 W maximum; 8 W idle mode

Environmental Specifications

Operating Temperature:	5 to 40 degrees C (41 to 104 degrees F)
Storage:	-40 to 60 degrees C (-40 to 140 degrees F)
Operating Humidity:	10-90% non-condensing (5 to 40 degrees C)
Storage Humidity:	10-90% non-condensing (0 to 60 degrees C)